|
Anomaly Guide#75 Communications Restored (DirtyBin) |
| Related Pictures |
|
First determine which device triggered the anomaly by examining the anomaly message on the application's computer console (within the Metalprogetti B2K/BAM application).
For Uniform Conveyor Systems running B2K
The anomaly record will contain both the CONVEYOR number as well as a POINT description which indicates the faulting device (arm, gate, etc).
For Storage Systems running BAM
The device ID is made up of 4 digits - the first 2 indicate the conveyor ID, the second 2 indicate the device ID.
In the following examples, XX represents conveyor ID while the last 2 digits represent the device.
Main conveyor anomalies will always be XX-00,
extraction arm anomalies will always be XX-01 through XX-10 depending on how many arms are installed,
and feedrail anomalies will always be XX-11 as demonstrated below.
|
| Possible Causes | Checks to Perform |
| Dirty bin was recently power cycled or network outage | This is an informative anomaly only and indicates that communications between the PC and dirty bin was restored, likely due to dirty bin being power cycled or temporarily loosing network connectivity to the main system. |